The above sample waveforms depict the following:
Upper Left Composite 2nd Order distortions in a HFC cable television plant.
Upper Right A spurious beat under a 256-QAM carrier.
Lower Left Signal leakage in the 700 MHz band.
Lower Right Sporadic interfering carrier captured with a 'signal mask' feature.
RF Spectrum Analysis and Testing from 9 kHz to 6.2 GHz. Services provided (to 6.2 GHz unless noted otherwise) include calibrated field strength measurements; interference analysis and location (including TI interference at TVRO installations); digital carrier measurements including QAM, OFDM, TDMA, LTE & WiMax; and scalar measurements [to 2.0 GHz] including gain/loss, frequency response, and isolation. See the Downloads page for measurements on various CATV and satellite components, including frequency response, isolation and return loss.
Associated RF Testing including radio & television transmitters, community repeaters, WiFi & WISP systems, and wireless path profile calculations and measurements.
Cable Television FCC Proof of Performance testing, with all FCC mandated tests (analog and QAM) performed during testing. All downstream QAM carriers are tested to ANSI/SCTE 40 2016 specifications. A sample FCC POP report is available on the ‘Downloads’ page.
High Definition ATSC (8-VSB) receive site testing including antennas, downleads, decoders, and full analysis of the 8-VSB signal with a dedicated 8-VSB spectrum analyzer. A computerized signal survey level projection program is utilized (CSE’s in-house survey program) is correlated with receive site measurements. Services also include the locating of optimal alternate receive sites; where the existing site is prohibitive to good off-air reception. See the Download page for an article on 8-VSB theory, reception, plus actual measurements.
Technical Due Diligence testing for cable system sale and acquisition. A sample Technical Due Diligence Report is available upon email request and provided in .pdf format.
Cable Television Reverse Path Proof of Performance testing, using an injected upstream high symbol rate QAM carrier from HFC plant ‘line ends’, with complete analysis of the ‘condition’ of the entire return path and remedial action recommendations where necessary.
General Engineering and Design Services for Broadband Networks including headend FDM combiner design (downstream & upstream) and testing (including the ability to test headend components or ‘combiner sections’ for frequency response and isolation); and outside plant RF/AC design including BOM and map creation. Map printing services are provided, with sample maps available on request.